A desk and chair bundle where the seat height and the desktop height are built to meet.

Bought together, these two pieces cover a full working day in three positions: seated at desk height, seated reclined, and standing. The desk raises and lowers electrically on a steel frame, and the chair rolls clear of it on five casters when you switch to standing. Nothing needs to be swapped, moved, or stored between positions.

The desktop travels 41cm, from 72cm at its lowest to 113cm at full extension, and the chair seat travels 10cm, from 62cm to 72cm. That overlap is the point. At 62cm the seat clears the 72cm underside comfortably, and at the desk’s seated setting the two align without a footrest or riser. The surface measures 140cm wide by 60cm deep and takes 80kg of static load. The chair holds users to 110kg and stands 114cm to 121cm tall when assembled.

Load ratings, frame structure, and floor behaviour.

The desk sits on a steel frame with dual support bars that limit lateral movement at standing height. This matters when you type or sketch while standing, where a surface that flexes under light hand pressure becomes distracting. The particle board top carries 80kg of static load, enough for two large monitors, a desktop tower, and peripherals. The desk itself weighs 33.4kg and sits outside that figure.

Underneath, the chair distributes its load across a reinforced nylon base with five contact points and five casters. Those wheels roll on ceramic tile, wood, laminate, and carpet without catching or scuffing, so a mat is optional rather than necessary. The chair weighs 11kg and its 66cm square footprint tucks under the 140cm span without contact.

Here is why the Standing Desk and Ergonomic Chair Bundle is the best choice for our customers.

This pairing was assembled for people setting up a dedicated workspace from scratch, or replacing a fixed desk and a kitchen chair with something built for eight-hour days. Buying seating and surface separately often produces a mismatch: a chair that sits too high under the desk, or a desk that will not drop low enough for a shorter user. The overlapping ranges here remove that problem before it starts.

The two-year warranty applies to both items, covering manufacturing defects in the pneumatic cylinder, base, frame, and motor components. Assembly for the pair runs roughly 65 to 90 minutes in total, with labelled components, hardware, and visual instructions in each box.

Here are 6 reasons we believe the Standing Desk and Ergonomic Chair Bundle is the right fit for your household.

The Two Heights Are Designed to Overlap

The chair's 62cm to 72cm seat range meets the desk's 72cm minimum. No shimming, no riser, no compromise at either end of the adjustment.

Posture Changes Without Standing Up

Between the desk's three presets and the chair's locking recline, you can shift between upright work, reclined reading, and standing without leaving your position or rearranging equipment.

Airflow in the Chair, Quiet in the Desk

The mesh back keeps heat from building behind you across long sessions, and the sub-50dB motor means the height change itself never interrupts what you are doing.

Weight Ratings That Cover Real Setups

An 80kg desktop capacity and a 110kg seat capacity accommodate heavy multi-monitor rigs and the majority of adult users without stressing either mechanism.

Cable Routing, Lighting, and Hooks in the Box

Perforated cable panels are built into the desk frame rather than clipped on afterwards. An LED light bar and two accessory hooks ship with the desk, so headphone and cable storage is handled from day one.

A Neutral Palette That Fits Existing Rooms

The white desktop and grey upholstery on a black base read as office equipment rather than statement furniture, which keeps the pair usable in a spare bedroom, a study, or a shared living space.

Frequently Asked Questions

Does the chair actually fit under the desk at its lowest setting?

Yes. The desk bottoms out at 72cm and the chair’s minimum seat height is 62cm, leaving 10cm of clearance for your thighs and the seat pan. At maximum seat height the two are level, which is the intended seated working position for taller users.

How long does the full bundle take to assemble?

The desk is a one-person job at 45 to 60 minutes, and the chair takes 20 to 30 minutes with a screwdriver or the included hex tool. Both boxes contain labelled parts, hardware, and instructions. Assemble the desk first so you have a surface to work on.

Can I stand at the desk and still use the chair for breaks?

Yes. Save a standing height to one memory slot and your seated height to another, then roll the chair back when you raise the desk. The casters move freely on tile, wood, laminate, and carpet, so repositioning does not require lifting.

Are the chair armrests adjustable to suit the desk height?

The armrests are fixed at 44cm above the seat, which falls within the standard range for keyboard and mouse work. Because the seat itself moves through 10cm, you adjust arm position relative to the desktop by changing seat height rather than armrest height.

What happens if the desk legs hit the chair while rising?

The anti-collision system reads the resistance, stops the motor, and retracts the frame a short distance. This protects the chair back, the desk mechanism, and anything else in the path of the legs. It is a safety response, not a fault condition.

How do I clean each surface?

Wipe the white particle board desktop with a damp cloth and dry it promptly, since prolonged standing moisture can affect the finish. The chair’s mesh back and fabric seat respond to light vacuuming and spot cleaning; the mesh holds its structure under pressure and does not compress flat over time.

Need help? Call us:

Standing Desk and Ergonomic Chair Bundle – 140cm White Electric Desk + Grey Mesh Office Chair

Have any Questions?

A desk and chair bundle where the seat height and the desktop height are built to meet.

Three Saved Heights, Recalled in One Press

Overlapping Height Ranges Between Seat and Surface

Perforated Mesh Back with a Lockable Tilt

Obstruction Detection on a Sub-50dB Motor

Load ratings, frame structure, and floor behaviour.