Shop – Nissi https://nissi.mt Wed, 29 Jul 2026 21:24:44 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.2 https://nissi.mt/wp-content/uploads/2026/03/cropped-Nissi-Favicon-32x32.png Shop – Nissi https://nissi.mt 32 32 Standing Desk and Ergonomic Chair Bundle – 140cm White Electric Desk + Grey Mesh Office Chair https://nissi.mt/product/standing-desk-and-ergonomic-chair-bundle-140cm-white-electric-desk-grey-mesh-office-chair/ Fri, 10 Jul 2026 15:43:47 +0000 https://nissi.mt/?post_type=product&p=5839 This home office bundle pairs the 140cm Adjustable Electric Standing Desk in white with the Ergonomic Office Chair in grey. The desk moves between 72cm and 113cm using a three-position memory controller, runs below 50dB, and carries 80kg on a steel frame. The chair brings a high-back mesh backrest, a fabric seat adjustable from 62cm to 72cm, a locking recline, and a five-point nylon base rated to 110kg. Cable routing, an LED light bar, two hooks, and all mounting hardware are included.

]]>

A desk and chair bundle where the seat height and the desktop height are built to meet.

Bought together, these two pieces cover a full working day in three positions: seated at desk height, seated reclined, and standing. The desk raises and lowers electrically on a steel frame, and the chair rolls clear of it on five casters when you switch to standing. Nothing needs to be swapped, moved, or stored between positions.

The desktop travels 41cm, from 72cm at its lowest to 113cm at full extension, and the chair seat travels 10cm, from 62cm to 72cm. That overlap is the point. At 62cm the seat clears the 72cm underside comfortably, and at the desk’s seated setting the two align without a footrest or riser. The surface measures 140cm wide by 60cm deep and takes 80kg of static load. The chair holds users to 110kg and stands 114cm to 121cm tall when assembled.

Three Saved Heights, Recalled in One Press

The desk controller stores three independent height settings and recalls each without manual dialling. A full run from 72cm to 113cm takes around 20 seconds; moves between two saved presets are shorter. Reprogramming is done by holding the save function at a new target height, and the stored values survive a power disconnection.

Overlapping Height Ranges Between Seat and Surface

The chair's pneumatic cylinder covers 62cm to 72cm, and the desk's lowest position is 72cm. Any seated posture within that band puts your forearms level with the surface without a wrist rest or platform. Taller users sit near 72cm; shorter users drop the cylinder and still clear the frame.

Perforated Mesh Back with a Lockable Tilt

The chair's high back runs from the lumbar region to the upper shoulders in perforated reinforced nylon mesh, which keeps air moving behind the torso rather than trapping it the way padded foam does. The recline mechanism releases for reading or calls and locks at any angle for focused work.

Obstruction Detection on a Sub-50dB Motor

If the desk legs meet resistance mid-travel, the motor halts and retracts slightly, protecting the mechanism along with any monitor arm or chair back in its path. Adjustment noise stays under 50 decibels, quieter than a speaking voice, so raising the desk during a call goes unremarked.

Load ratings, frame structure, and floor behaviour.

The desk sits on a steel frame with dual support bars that limit lateral movement at standing height. This matters when you type or sketch while standing, where a surface that flexes under light hand pressure becomes distracting. The particle board top carries 80kg of static load, enough for two large monitors, a desktop tower, and peripherals. The desk itself weighs 33.4kg and sits outside that figure.

Underneath, the chair distributes its load across a reinforced nylon base with five contact points and five casters. Those wheels roll on ceramic tile, wood, laminate, and carpet without catching or scuffing, so a mat is optional rather than necessary. The chair weighs 11kg and its 66cm square footprint tucks under the 140cm span without contact.

Here is why the Standing Desk and Ergonomic Chair Bundle is the best choice for our customers.

This pairing was assembled for people setting up a dedicated workspace from scratch, or replacing a fixed desk and a kitchen chair with something built for eight-hour days. Buying seating and surface separately often produces a mismatch: a chair that sits too high under the desk, or a desk that will not drop low enough for a shorter user. The overlapping ranges here remove that problem before it starts.

The two-year warranty applies to both items, covering manufacturing defects in the pneumatic cylinder, base, frame, and motor components. Assembly for the pair runs roughly 65 to 90 minutes in total, with labelled components, hardware, and visual instructions in each box.

Here are 6 reasons we believe the Standing Desk and Ergonomic Chair Bundle is the right fit for your household.

The Two Heights Are Designed to Overlap

The chair's 62cm to 72cm seat range meets the desk's 72cm minimum. No shimming, no riser, no compromise at either end of the adjustment.

Posture Changes Without Standing Up

Between the desk's three presets and the chair's locking recline, you can shift between upright work, reclined reading, and standing without leaving your position or rearranging equipment.

Airflow in the Chair, Quiet in the Desk

The mesh back keeps heat from building behind you across long sessions, and the sub-50dB motor means the height change itself never interrupts what you are doing.

Weight Ratings That Cover Real Setups

An 80kg desktop capacity and a 110kg seat capacity accommodate heavy multi-monitor rigs and the majority of adult users without stressing either mechanism.

Cable Routing, Lighting, and Hooks in the Box

Perforated cable panels are built into the desk frame rather than clipped on afterwards. An LED light bar and two accessory hooks ship with the desk, so headphone and cable storage is handled from day one.

A Neutral Palette That Fits Existing Rooms

The white desktop and grey upholstery on a black base read as office equipment rather than statement furniture, which keeps the pair usable in a spare bedroom, a study, or a shared living space.

Frequently Asked Questions

Does the chair actually fit under the desk at its lowest setting?

Yes. The desk bottoms out at 72cm and the chair’s minimum seat height is 62cm, leaving 10cm of clearance for your thighs and the seat pan. At maximum seat height the two are level, which is the intended seated working position for taller users.

The desk is a one-person job at 45 to 60 minutes, and the chair takes 20 to 30 minutes with a screwdriver or the included hex tool. Both boxes contain labelled parts, hardware, and instructions. Assemble the desk first so you have a surface to work on.

Yes. Save a standing height to one memory slot and your seated height to another, then roll the chair back when you raise the desk. The casters move freely on tile, wood, laminate, and carpet, so repositioning does not require lifting.

The armrests are fixed at 44cm above the seat, which falls within the standard range for keyboard and mouse work. Because the seat itself moves through 10cm, you adjust arm position relative to the desktop by changing seat height rather than armrest height.

The anti-collision system reads the resistance, stops the motor, and retracts the frame a short distance. This protects the chair back, the desk mechanism, and anything else in the path of the legs. It is a safety response, not a fault condition.

Wipe the white particle board desktop with a damp cloth and dry it promptly, since prolonged standing moisture can affect the finish. The chair’s mesh back and fabric seat respond to light vacuuming and spot cleaning; the mesh holds its structure under pressure and does not compress flat over time.

]]> Pro Grade 40kg Adjustable Dumbbells – 2x 40kg Dumbbells https://nissi.mt/product/pro-grade-40kg-adjustable-dumbbells-2x-40kg-dumbbells/ Sun, 28 Jun 2026 06:20:40 +0000 https://nissi.mt/?post_type=product&p=5391
The Pro Grade 40kg Adjustable Dumbbells are a twist-dial adjustable pair, each reaching 40kg across 17 distinct weight settings. Available increments run from 5kg through to 40kg: 5, 7, 9, 11, 13, 15, 18, 20, 22, 25, 27, 29, 32, 34, 36, 38, and 40kg. The dial mechanism locks the selected plates in position while the remainder stay in the included storage trays. Each dumbbell has a textured anti-slip handle. Two storage trays are included with the pair.
]]>

An adjustable dumbbell pair that spans 17 weight settings from 5kg to 40kg per dumbbell.

The Pro Grade 40kg Adjustable Dumbbells replace a full rack of fixed weights using a twist-dial system that selects the target load in seconds. Each dumbbell covers 17 settings between 5kg and 40kg, and the dial locks only the chosen plates onto the bar while the rest remain seated in the storage tray. Both trays are included in the set.

The 17 increments are not evenly spaced, which reflects how resistance training actually progresses. Smaller gaps at the lower end, 5, 7, 9, 11, 13, 15kg, allow gradual load increases for isolation and accessory work where fine adjustments matter most. The steps widen through the mid-range and upper end, 18, 20, 22, 25, 27, 29, 32, 34, 36, 38, 40kg, matching the larger jumps that are practical for compound pressing, rowing, and hinging movements at heavier loads.

Twist-Dial Selection Mechanism

Rotating the dial at either end of the dumbbell engages the internal locking system, which secures the plates corresponding to the selected weight and leaves the remainder in the tray. The change takes a few seconds per dumbbell, with no collars, clips, or loose plates to manage between sets.

17 Distinct Weight Settings

The full increment list runs: 5, 7, 9, 11, 13, 15, 18, 20, 22, 25, 27, 29, 32, 34, 36, 38, and 40kg. This range covers warm-up loads, working sets, and top-end strength work without requiring any additional equipment.

Textured Anti-Slip Handle

The handle surface has a textured finish that maintains grip contact throughout sets. This is relevant at higher loads, above 25kg per dumbbell, where smooth handles can compromise control during pressing and rowing movements.

Included Storage Trays

Each dumbbell rests in its own tray, which holds the unloaded plates in place and keeps them off the floor between sessions. The trays also serve as the loading dock: the dumbbell is placed back into the tray to disengage the current setting before a new weight is dialled in.

Seventeen weight settings in the footprint of two dumbbells.

A rack of fixed dumbbells covering 5kg to 40kg in comparable increments would require roughly 17 pairs, occupying several metres of floor space. The Pro Grade pair sits in two storage trays and can be stored under a bench, in a corner, or inside a cupboard when not in use. The practical implication is that a full strength training programme from beginner loading through to advanced compound lifts becomes viable in a living room, spare bedroom, or any space large enough for a mat.

The dial system also removes a persistent friction point in plate-loaded training: the time cost of changing weights between exercises or supersets. Moving from a 15kg lateral raise to a 32kg bent-over row, for example, requires two dial turns rather than removing, reordering, and reattaching plates. For time-restricted training sessions or circuit-based programming where rest periods are short, this matters in practice.

Here is why the Pro Grade 40kg Adjustable Dumbbells is the best choice for our customers.

This pair was built for people who want a complete dumbbell range at home without the floor space, cost, or logistics of buying multiple fixed-weight sets. The 5kg to 40kg span covers beginner conditioning work, hypertrophy-focused programming, and heavy compound loading, all from a single product.

The dial adjustment is central to the product’s practicality. It makes it possible for multiple household members with different strength levels to train with the same pair on the same day, each selecting their own load per exercise without tools or setup time.

Here are 6 reasons we believe the Pro Grade 40kg Adjustable Dumbbells is the right fit for your household.

One Pair Covers 17 Weight Settings

From a single purchase, each dumbbell dials to any of 17 settings between 5kg and 40kg, removing the need for multiple fixed-weight pairs at different load points.

Weight Changes Take Seconds

The twist-dial mechanism selects and locks the target weight in a few seconds per dumbbell. There are no collars to thread, no plates to stack, and no clips to locate between sets.

The 5kg Starting Point Suits a Range of Users

A 5kg lower limit is light enough for shoulder isolation work, warm-up sets, and users earlier in their training. The same pair then scales to 40kg for heavier pressing and pulling exercises.

Storage Trays Are Included

Both trays come with the set, so the dumbbells have a designated resting position from day one. Unloaded plates stay organised inside the tray rather than loose on the floor.

The Increment Structure Matches Real Training Needs

The tighter gaps at the lower end of the range, where small load increases produce more meaningful adaptation, and wider gaps at the top, where larger jumps are workable, reflect how strength programming actually operates.

Multiple Users Can Share the Pair

Because weight selection is instant and requires no tools, two people with different working loads can use the same pair across a shared session without any meaningful setup time between turns.

Frequently Asked Questions

How does the dial mechanism lock the correct plates?

Rotating the dial to a target weight aligns an internal selector with the plate positions corresponding to that load. When the dumbbell is lifted from the tray, only the locked plates come with it. The remaining plates stay seated in the tray until the dial is moved to a new setting.

Place the dumbbell back into its tray, rotate the dial to the new target weight, and lift. The tray must be used during any setting change because the plate release mechanism only functions when the dumbbell is correctly seated.

Yes. Each dumbbell has its own independent dial, so one can be set to, say, 15kg while the other is set to 20kg. This is useful for unilateral exercises where each side works at a different load.

At those settings the dumbbells suit compound movements including Romanian deadlifts, single-arm rows, goblet squats, Bulgarian split squats, and flat or incline dumbbell press for stronger users. The textured handle is relevant at these weights, where grip security under load is more demanding.

The trays sit flat on the floor. If you prefer the dumbbells at a higher, easier-to-reach position, a dedicated stand can be added separately, but the trays alone are fully functional for storage and weight selection.

The 5kg minimum per dumbbell is appropriate for most beginners on upper body accessory movements. As strength develops, the same pair supports progressive loading all the way to 40kg without any additional purchase.

]]> 24kg Adjustable Dumbbells PRO Grade https://nissi.mt/product/24kg-adjustable-dumbbells-pro-grade/ Sun, 28 Jun 2026 06:17:12 +0000 https://nissi.mt/?post_type=product&p=5276

A pair of adjustable dumbbells built from steel and polyamide, with anti-slip metal handles and a 24kg maximum load per dumbbell.

The 24kg Adjustable Dumbbells PRO Grade set is a two-dumbbell system designed to replace a range of fixed-weight dumbbells within a single compact unit. Each dumbbell adjusts up to 24kg, and the resistance can be changed between settings quickly, allowing a training session to move from lighter isolation work through to heavier compound movements without stopping to swap equipment. The set covers the full scope of standard dumbbell exercises: pressing, rowing, curling, lateral raises, lunges, and floor-based movements.

The frame and plates are built from a combination of steel and PA (polyamide), a nylon-type engineering polymer that resists cracking and impact damage under repeated loading and unloading cycles. The anti-slip metal handle runs through the centre of the dumbbell assembly and is textured to maintain grip when the hand becomes wet during extended training. Both dumbbells sit in a dedicated storage tray included in the package, which holds the units at floor level and keeps the weight plates contained between sessions.

Steel and Polyamide Construction

The dumbbell frame uses steel for structural load-bearing, combined with PA (polyamide) plate components that resist chipping and surface cracking more effectively than cast iron alternatives. This material pairing keeps the set durable under daily use without the brittle failure risk that affects lower-grade plate materials over time. The steel components maintain dimensional accuracy so that the adjustment mechanism engages cleanly on each use.

Anti-Slip Metal Handle

The central handle is machined from metal with a textured grip surface rather than rubber or foam coating. Metal handles do not degrade, compress, or peel with extended use the way covered handles can, and the texture pattern maintains reliable contact between the palm and the handle even as perspiration builds during a session. This matters most during overhead pressing and single-arm movements where grip failure directly affects control of the load.

Quick Weight Adjustment Between Sets

The adjustment system allows the resistance level to be changed within seconds, making it practical to alternate between loads mid-workout without extending rest periods. This is relevant for training formats that require different weights for different exercises in sequence, such as supersets, circuit training, and progressive drop sets, where stopping to change equipment disrupts the structure of the session.

Included Storage Tray

The set comes with a purpose-built tray that holds both dumbbells when not in use. The tray keeps the plates captured and prevents the units from rolling on hard floors, which is a safety consideration in tighter home training spaces. It also keeps both dumbbells in a single fixed location, which is practical in rooms that serve multiple purposes and where floor clutter needs to be managed between sessions.

A dumbbell set that actually fits your life.

Two dumbbells and a storage tray form the entire footprint of this set. The tray sits on the floor and occupies the space of approximately two fixed-weight dumbbells placed side by side, while holding a complete adjustable system that covers a wide range of resistance levels. For a spare room, bedroom corner, or living area used as a training space, that ratio of floor area to training capacity is one of the central practical advantages of an adjustable set over a fixed-weight collection.

The 24kg upper limit per dumbbell covers the resistance range needed for most upper and lower body dumbbell exercises at a serious training level, including heavy goblet squats, Romanian deadlifts, chest pressing, and bent-over rows. The two-dumbbell format also means the set is usable for bilateral movements where both hands hold equal loads simultaneously, which is the standard configuration for the majority of compound dumbbell exercises.

Here is why the 24kg Adjustable Dumbbells PRO Grade is the best choice for our customers.

This set was built for people who train seriously with dumbbells at home and need a single piece of equipment that can handle the full weight range their programme requires. Owning a rack of fixed dumbbells from 4kg to 24kg in 2kg increments means buying and storing eleven pairs of dumbbells. This adjustable set collapses that into two units and a tray, without reducing the weight range available.

The steel and polyamide construction and anti-slip metal handle address the two points where cheaper adjustable dumbbells tend to fail: plates that crack under load cycling, and handles that lose grip texture after heavy use. Both are problems that affect the longevity and safety of a set used daily over years rather than occasionally. Here are 6 reasons we believe the 24kg Adjustable Dumbbells PRO Grade is the right fit for your household.

24kg Per Dumbbell Covers Serious Training Loads

At 24kg per hand, the set reaches the resistance level needed for demanding compound movements including heavy dumbbell rows, chest pressing, and lower body exercises. There is no need to upgrade to a heavier set as strength increases through the early and mid stages of a training programme.

Two Dumbbells in the Footprint of Two Dumbbells

The storage tray holds both units in a fixed floor footprint roughly equivalent to two fixed dumbbells placed alongside each other. The space occupied does not grow as the effective weight range expands, because all resistance levels are built into the same two physical units.

Steel and Polyamide Plates Resist Impact Damage

Polyamide plates absorb minor impacts without chipping or cracking the way cast iron does when a dumbbell is set down firmly or knocked against a hard surface. Combined with the steel frame, this makes the set suited to daily use in a home setting where controlled equipment handling is not always consistent.

Metal Handle Grip That Does Not Degrade

The anti-slip metal handle maintains its texture throughout the life of the product. Foam and rubber handle coverings compress and peel over months of regular use; a bare metal grip surface does neither, which means the contact quality between hand and handle stays consistent from the first session to the last.

Quick Adjustments Support Varied Training Formats

Changing resistance between sets takes seconds rather than requiring a separate pair of dumbbells to be retrieved. This keeps the pacing of supersets, circuits, and progressive loading schemes intact without extending the time between exercises.

Storage Tray Included at No Additional Cost

The tray is part of the package rather than a separate purchase. It keeps both dumbbells off the floor, prevents them from rolling, and gives the set a defined home in the training space. For rooms that double as living or sleeping areas, having the equipment contained in a tray rather than loose on the floor makes a practical difference.

Frequently Asked Questions

What is included in the package?

The set includes two adjustable dumbbells, each with a maximum load of 24kg, and a storage tray that holds both units. The package contains everything needed to begin training immediately; no additional plates or components are required.

The construction uses a steel frame combined with PA (polyamide) plates. Polyamide is an engineering polymer in the nylon family that offers good impact resistance and does not chip or crack under the loading and unloading cycles that occur during normal dumbbell training. The handle is machined metal with an anti-slip texture.

The adjustment mechanism is designed for fast transitions, with resistance changes achievable in seconds. This makes the set practical for training formats where the load needs to change frequently, such as circuit training, supersets, or drop sets, without adding significant time to rest periods.

The dumbbells cover standard upper body movements including pressing, curling, rowing, and lateral raises, as well as lower body work such as goblet squats, Romanian deadlifts, lunges, and split squats. The 24kg ceiling per dumbbell is sufficient for most bilateral and unilateral lower body dumbbell exercises at an intermediate to advanced training level.

The tray provides a fixed resting position for both dumbbells at floor level. It keeps the plate sections contained so they do not separate from the handle unit when the dumbbell is set down, and prevents the units from rolling on smooth floors. It also gives the set a consistent storage location in rooms that serve multiple purposes.

The 24kg Adjustable Dumbbells PRO Grade set includes a two-year warranty covering manufacturing defects in the steel frame, polyamide plates, and handle assembly.

]]> Professional Adjustable Weight Bench https://nissi.mt/product/professional-adjustable-weight-bench/ Sun, 28 Jun 2026 06:15:05 +0000 https://nissi.mt/?post_type=product&p=5204

An adjustable weight bench built to IPF-regulation height with 300kg load capacity and 96 configuration options.

The Professional Adjustable Weight Bench is a freestanding lifting platform designed around the geometry and structural demands of serious barbell training. The deck height is fixed at 44cm, the exact elevation required by the International Powerlifting Federation, which places the user in a mechanically sound position for horizontal and incline pressing and allows the barbell to be reracked safely between sets.

Configuration is controlled across three independent adjustment points: the backrest moves through 8 angles, the seat through 4 positions, and the leg support through 3 levels. These three axes combine to produce 96 distinct setups, covering flat bench press, incline pressing at multiple gradients, decline work, seated shoulder press, and various supported rowing and curl positions. The deep-groove pull-pin mechanism locks each backrest position without drift, even under near-maximal loads where conventional shallow-notch systems tend to creep.

Triple-Triangle Frame Construction

Rather than a standard two-point support structure, the frame uses three reinforced geometric triangles to distribute load across multiple paths simultaneously. This bracing method prevents lateral flex and torsional movement when force is applied off-centre, which happens routinely during unilateral dumbbell work and asymmetric bar paths. The result is a 300kg tested load rating built into the geometry of the frame itself.

44cm IPF-Specification Deck Height

The 44cm platform elevation is not an arbitrary measurement. It is the height specified by the International Powerlifting Federation for competition benches because it places the lifter's foot contact, hip angle, and shoulder position in the correct relationship for both force production and barbell control. Training consistently at this height means the pressing mechanics practiced at home carry over accurately to any standard setup.

Deep-Groove Pull-Pin Locking System

The backrest adjustment uses a pull-pin that seats into extra-depth engagement grooves rather than the shallower notches found on budget benches. This deeper mechanical engagement prevents the backrest from shifting position during a working set, which matters most when the lifter cannot safely re-rack and re-set mid-lift. Each position holds without ratcheting, wobbling, or gradual migration under sustained load.

Friction-Textured Leather Surface

The bench pad uses a leather covering with a friction-enhanced surface texture rather than standard smooth vinyl. This texture maintains grip against skin and clothing when the surface becomes wet from perspiration, reducing the risk of the upper back sliding laterally during heavy incline or flat pressing. The material is constructed to resist cracking and surface delamination through regular, high-frequency use.

A weight bench that actually fits your life.

When folded, the bench collapses to approximately 20% of its operational footprint, allowing upright wall storage or horizontal placement under a bed or in a cupboard. The unit weighs 10.55kg, so repositioning it between a training area and a storage spot does not require a second person. The training dimensions are 107cm wide by 38cm deep with a 44cm deck height, which places it within the space occupied by a standard office chair.

The 300kg weight limit covers the full range of home training scenarios, from lighter dumbbell work through to heavy barbell bench press and decline pressing with added resistance. A single bench at this load rating handles the demands of multiple users in the same household training at different levels, without the need to grade up to a separate piece of equipment as strength increases.

Here is why the Professional Adjustable Weight Bench is the best choice for our customers.

This bench was designed for people training with barbells and heavy dumbbells at home who need the structural integrity and positional accuracy that flat-rate budget benches cannot provide. The triple-triangle frame and deep-groove locking system address the two most common failure points in cheaper equipment: frame flex under load and backrest drift mid-set. Both are safety issues, not just inconveniences.

The 96-position configuration range means this single piece of equipment replaces what would otherwise require a flat bench, an incline bench, and a decline bench. The foldable frame returns that space when the session is finished. Here are 6 reasons we believe the Professional Adjustable Weight Bench is the right fit for your household.

Competition-Standard Deck Height

The 44cm platform height is the IPF specification for a reason: it positions the body correctly for pressing. Training at this height consistently builds movement patterns that hold up under any standard barbell setup.

A 300kg Tested Load Rating

The triple-triangle frame construction is stress-tested to 300kg, covering barbell work, dumbbell training, and use with resistance bands or a weight vest. The rating reflects physical testing of the frame, not an estimate.

96 Position Combinations

Eight back angles, four seat settings, and three leg support levels give 96 distinct configurations from a single bench. Flat, incline, decline, seated, and supported positions are all accessible without changing equipment.

Locking That Holds Under Load

The deep-groove pull-pin engages more of the adjustment slot than standard pin systems, creating a mechanical lock that does not shift when the backrest is loaded. This removes the safety risk of a position changing mid-set.

A Surface That Grips When Wet

Friction-textured leather maintains contact with skin and fabric as perspiration builds during a session. This is a practical design choice for high-intensity training where a slippery surface would compromise both safety and lifting mechanics.

Folds to a Fraction of Its Size

The frame collapses to around 20% of its working footprint, making it practical to store in a room that serves multiple purposes. No dedicated gym space is required to use this bench daily.

Frequently Asked Questions

Why is the 44cm height important for a weight bench?

The 44cm deck height is the standard set by the International Powerlifting Federation for competition use. This specific measurement places the lifter’s feet, hips, and shoulders in the correct position for pressing mechanics and allows the barbell to be controlled safely during reracking. Benches built to this height produce pressing habits that transfer accurately to any standard barbell setup.

Standard adjustable benches use shallow engagement grooves that allow slight positional movement under sustained load. This bench uses a deeper groove profile that the pull-pin seats into fully, creating a more secure mechanical lock. The difference is most relevant during heavy compound pressing where a shifting backrest cannot be corrected mid-lift.

Three reinforced geometric triangles distribute force across multiple structural paths rather than concentrating load at two contact points. This prevents lateral flex and torsional movement when force is applied unevenly, which is the normal condition during dumbbell and barbell pressing. The 300kg load rating is a direct result of this geometry.

The bench offers 96 combinations, produced by selecting from 8 backrest angles, 4 seat positions, and 3 leg support levels. These positions cover flat, incline, decline, and fully upright configurations for the back, alongside seat and leg adjustments that support correct hip positioning for each angle.

The collapsed frame takes up roughly 20% of the space it occupies in training configuration. This allows vertical wall placement or horizontal storage in a wardrobe, under a bed, or in a hallway cupboard without significant disruption to the surrounding room.

The bench arrives mostly pre-assembled and is described as ready to train on in approximately three minutes. All fasteners and adjustment hardware are included, and no power tools are needed. The illustrated setup guide walks through the final connection steps.

]]> 10-Level Adjustable Power Tower https://nissi.mt/product/10-level-adjustable-power-tower/ Sun, 28 Jun 2026 06:13:45 +0000 https://nissi.mt/?post_type=product&p=5185
The 10-Level Adjustable Power Tower is an alloy steel training station designed for pull-ups, dips, vertical knee raises, push-ups, and chin-ups. The height adjusts across 10 positions from 165cm to 210cm, accommodating different users and ceiling heights. An H-frame base with arched stability bars and vacuum footpads keeps the unit stable during loaded sets. Soft grip handles reduce hand fatigue during longer training sessions. The base measures 75cm x 82cm, and the station carries a maximum load of 200kg.
]]>

A power tower that covers five upper body movements across 10 height settings on a 200kg-rated alloy steel frame.

The 10-Level Adjustable Power Tower is a freestanding training station that brings pull-ups, chin-ups, dips, vertical knee raises, and push-ups into a single unit. No attachments or accessories are required to switch between movements; each exercise position is built directly into the frame, so it is possible to move from one pattern to the next without adjusting hardware or reconfiguring the station.

The height column spans 165cm to 210cm across 10 discrete positions, allowing the bar height to match both the user’s reach and the available ceiling clearance. Soft grip handles on the pull-up bar and dip arms cushion the hand contact points during extended sets, reducing friction-related fatigue over higher-volume training. The base footprint sits at 75cm x 82cm, with an overall frame depth of 98cm, so the station occupies a defined and predictable area within any training space.

10 Positions, One Locking Column

The upright adjusts through 10 set positions from 165cm to 210cm, each locking securely in place before use. The adjustment mechanism holds the bar at the chosen height without movement during pulling or pressing loads, and repositioning between settings takes only seconds. This range covers users across a wide spread of heights without requiring a separate piece of equipment.

H-Frame Base with Arched Stability Bars

The lower frame forms an H-shape with arched reinforcement bars running across the base section. This construction distributes lateral load during dips and pulls, preventing the feet from lifting or shifting on hard floor surfaces. Vacuum-style footpads at each contact point grip the floor without requiring bolts, screws, or wall anchors, keeping the unit stationary across all height configurations.

Fixed Soft Grip Handles

The pull-up bar and dip handles are covered in a soft grip material that cushions the palms during extended holds. Fixed handles do not rotate or flex under load, providing a consistent and predictable contact surface across every movement. This is particularly relevant during high-rep sets where grip consistency directly affects control.

Alloy Steel Frame, 200kg Rated

The entire structure is fabricated from alloy steel, giving the station the rigidity and load rating needed for serious bodyweight training. With a maximum supported weight of 200kg, it accommodates a broad range of users including those training with a weight vest or added resistance. The assembled unit weighs 9.7kg, light enough to reposition within a room but structurally stable during use.

A power tower that actually fits your life.

The base of this station measures 75cm wide by 82cm deep, with an overall frame depth of 98cm. That puts it within the footprint of most standard weight benches, meaning it can fit into a spare room corner, a garage section, or a dedicated training area without significant reorganisation of the surrounding space. At just 9.7kg, it can also be moved between rooms when the floor space is needed for other purposes.

The 200kg weight limit covers the full range from lighter beginners through to heavier athletes training with additional resistance. The 10 available height positions mean that users on both ends of the height spectrum can find a bar position that suits their reach, without the top of the frame pressing against the ceiling or the bar sitting too high to grip comfortably.

Here is why the 10-Level Adjustable Power Tower is the best choice for our customers.

This station was built for people who want to train pull-ups, dips, and core movements at home without committing to a large floor area or buying separate pieces of equipment for each exercise. Five movement patterns are accessible on one frame, and the 10-position height column means the station adapts to the available space rather than requiring the space to be built around it.

The H-frame base, vacuum footpads, and alloy steel construction each address a specific concern that comes with freestanding training equipment: the frame does not flex under load, the base does not require permanent fixings, and the 200kg rating covers the demands of daily use across a household. Here are 6 reasons we believe the 10-Level Adjustable Power Tower is the right fit for your household.

One Station, Five Exercises

Pull-ups, chin-ups, dips, vertical knee raises, and push-ups are all built into the frame without the need for additional equipment. There is no need for a separate pull-up bar, dip station, or push-up handles alongside this unit.

Height That Adjusts to the Space

Ten locking positions between 165cm and 210cm mean the bar height can be set to the ceiling clearance available and the individual user's arm reach. The range covers short, average, and tall users from the same frame.

A Base That Holds Without Fixings

The H-frame design and vacuum footpads keep the station in position on hard floor surfaces without wall anchors, floor bolts, or weighted bases. The arched stability bars distribute the pulling and pressing forces down through the base during every rep.

200kg Weight Capacity

The alloy steel frame carries up to 200kg, making it suitable for most adults and for training configurations that include a weighted vest or resistance bands. The rating reflects the structural construction of the frame, not a target user weight range.

Compact Dimensions for a Home Setting

A 75cm x 82cm base footprint and a 9.7kg total weight mean this station sits comfortably in standard rooms without requiring a dedicated gym space. It can be placed against a wall when not in use, and repositioned for training without assistance.

No Specialist Tools or Fixings Needed

Assembly hardware and a user manual are included. The vacuum footpads provide floor grip on smooth surfaces without drilling, and no wall mounting is required. The frame goes together using the supplied components only.

Frequently Asked Questions

How much floor space does this station need?

The base footprint is 75cm wide by 82cm deep, and the overall frame depth is 98cm. For safe use, allow at least one metre of clear space on each side and directly in front of the unit so there is room to hang, lower, and move freely during exercises.

The pull-up bar column moves between 165cm and 210cm across 10 fixed positions. Each setting locks in place before use and does not shift during a set. The full range of positions is accessible at any point without tools; the mechanism is adjusted by hand.

The station is rated to a maximum of 200kg. This covers standard bodyweight use for the majority of adults and allows for additional resistance from a weight vest. The station is intended for a single user at a time.

The frame supports pull-ups, chin-ups, dips, vertical knee raises, and push-ups. The overhead bar provides a wide grip for pull-ups and a narrower reverse grip for chin-ups. The side-mounted dip handles are fixed, and the lower frame provides a push-up position at floor level.

No permanent fixings are required. The vacuum-style footpads grip smooth hard floor surfaces, and the H-frame base provides the stability needed for pulling and pressing movements without anchoring. A rubber floor mat is recommended on softer or uneven surfaces to improve grip.

Assembly hardware and a user manual are included in the box. The station can be assembled using the supplied tools, and the process typically takes under one hour for most users. No power tools are required.

]]> Ultra Low-Profile Lightweight Car Jack – 3.0 Tonnes Capacity https://nissi.mt/product/ultra-low-profile-lightweight-car-jack-3-0-tonnes-capacity/ Sun, 28 Jun 2026 06:13:08 +0000 https://nissi.mt/?post_type=product&p=5569

A hydraulic floor jack that reaches 75mm clearance and lifts up to 3.0 tons.

The Low-Profile Lightweight Car Jack uses a dual-pump hydraulic system to raise vehicles from 75mm to 500mm. The 3.0-ton capacity covers most passenger cars, sports cars, and crossovers, and the reinforced steel lifting arm holds the load stable once elevated. It arrives fully assembled and tested.

The 75mm minimum height is what separates this jack from standard floor jacks. Most conventional models sit too tall to slide under lowered vehicles, performance cars, or modern sedans with aerodynamic front ends. At 75mm, this jack reaches the lift points on vehicles that standard workshop jacks simply cannot access.

Dual-Pump Hydraulic System

Two pumps working together cut the handle strokes needed to reach maximum height by roughly half compared with a single-pump jack. Lifting is faster and takes less physical effort, which makes a noticeable difference during repeated use across a service session.

75mm Minimum Entry Height

The slim profile slides beneath vehicles with as little as 75mm of ground clearance. This covers the majority of sports cars, lowered suspensions, and modern vehicles with factory aerodynamic bodywork that sits close to the ground.

Reinforced Steel Lifting Arm

The heavy-duty steel arm resists lateral movement and flex under load. Once a vehicle is raised, it stays level and stable for tyre changes, brake work, and undercarriage inspections.

425mm Total Lifting Range

From 75mm to 500mm, the jack covers initial entry under a low car through to full extension for comfortable underbody access. The 500mm ceiling is sufficient for brake caliper removal, suspension work, and exhaust inspection on most passenger vehicles.

Assembled, tested, and ready to use.

The jack arrives fully built and hydraulically tested. The only step before first use is checking the fluid level. There is no assembly, no calibration, and no run-in procedure.

At 32kg and 78 x 38 x 20cm, the frame is heavy enough to stay planted during lifting but manageable enough to reposition around a garage floor between jobs without assistance.

Here is why the Low-Profile Lightweight Car Jack is the best choice for our customers.

This jack was designed for vehicle owners and mechanics who work on modern cars with reduced ground clearance. The 75mm entry solves the most common limitation of standard floor jacks, and the dual-pump system removes the frustration of slow, stroke-heavy lifting on every job.

The 3.0-ton capacity and reinforced arm make it suitable for regular workshop use, while the ready-to-use delivery means there is no setup delay before the first lift.

Here are 6 reasons we believe the Low-Profile Lightweight Car Jack is the right fit for your household.

Reaches Vehicles Standard Jacks Cannot

At 75mm, the jack slides under sports cars, lowered vehicles, and cars with factory aerodynamic bodywork that sits too close to the ground for conventional floor jacks.

Dual Pumps Halve the Lifting Effort

The twin-pump system reduces handle strokes by approximately 50% compared with single-pump alternatives, making each lift faster and less demanding on the arms and back.

3.0-Ton Capacity for Most Passenger Vehicles

The lifting ceiling covers the weight of the majority of cars, coupes, and crossovers. Users with larger body-on-frame SUVs or trucks should verify axle weight before use.

Reinforced Arm Holds Steady Under Load

The heavy-duty steel arm does not flex or shift once a vehicle is raised, keeping the load secure during extended underbody work.

No Assembly Required

The jack is fully built and hydraulically tested before dispatch. Check the fluid level and begin lifting.

Two-Year Warranty on Hydraulic and Structural Components

The warranty covers the hydraulic system, structural integrity, and manufacturing defects for two years from purchase.

Frequently Asked Questions

Will the 75mm clearance fit under my car?

It suits most sports cars and vehicles with lowered suspension. If your lift points sit below 75mm, a purpose-built racing jack with a lower minimum would be required. Measuring at your intended lift point before purchasing is advisable if your car sits particularly low.

The dual-pump system halves the stroke count compared with single-pump jacks. The exact number depends on the vehicle’s weight, but the difference is noticeable from the first lift.

No. A floor jack is a lifting device, not a support stand. Once the vehicle is raised, axle stands rated to the vehicle’s weight should be used to support it before anyone works underneath.

Check the hydraulic fluid level as indicated in the manual before the first lift. If the level is correct, no further preparation is needed.

The 3.0-ton capacity covers most crossovers. For larger body-on-frame SUVs and pickups, check the vehicle’s axle weight rather than total kerb weight to confirm it falls within the rated capacity.

The two-year warranty covers the hydraulic components, structural integrity, and manufacturing defects. It does not cover damage from overloading or improper use.

]]> Ergonomic Office Chair https://nissi.mt/product/ergonomic-office-chair/ Sun, 28 Jun 2026 06:12:33 +0000 https://nissi.mt/?post_type=product&p=5498 The Ergonomic Office Chair is a high-back chair with a breathable mesh backrest and cushioned fabric seat. The pneumatic height adjustment moves the seat between 62cm and 72cm. Fixed armrests sit 44cm above the seat, and the chair reclines for flexible positioning. A reinforced five-point nylon base with five smooth-rolling casters supports users up to 110kg. Seat width is 50cm, seat depth 44cm.

]]>

An office chair with a mesh back, reclining seat, and pneumatic height adjustment up to 72cm.

The Ergonomic Office Chair combines a perforated mesh backrest with a cushioned fabric seat, covering both ventilation and comfort across long working sessions. The high back extends from the lumbar region to the upper shoulders, supporting the full length of the spine during seated desk work. A pneumatic cylinder adjusts seat height between 62cm and 72cm, and the integrated recline function lets you lock or release the seat angle depending on the task.

The five-point nylon base carries five smooth-rolling casters that move across hard floors and carpet without resistance. The chair supports users up to 110kg and has a total height range of 114cm to 121cm when assembled. Fixed armrests at 44cm above the seat hold your arms at a consistent angle during keyboard and mouse use, reducing the shoulder lift that unsupported armrests can cause.

Mesh Backrest for Ventilation

The perforated mesh back allows continuous airflow behind the torso throughout the working day. Unlike solid foam or padded backs, the open mesh construction does not trap heat during extended sessions, which is a practical advantage in warmer office environments.

Pneumatic Height Adjustment

The gas cylinder raises and lowers the seat between 62cm and 72cm with minimal effort. At 62cm minimum height, the chair fits comfortably beneath desks with a standard 70cm clearance, making it compatible with fixed-height and sit-stand desks in their seated position.

Recline Function with Lock

The recline mechanism allows the seat back to tilt for a more relaxed posture when reading or thinking, and can be locked in any chosen position for focused work. Varying between active and reclined postures throughout the day reduces sustained pressure on the lower back.

Five-Point Rolling Base

The reinforced nylon base distributes the chair's load across five points. The casters roll on ceramic tile, wood, laminate, and carpet without catching or scuffing, making the chair suitable for home offices with mixed flooring.

A high back that supports the spine from the lumbar region upward.

Most standard office chairs support the lower back only. The extended backrest on this chair reaches from lumbar level to the upper shoulder area, which matters during longer sessions where the upper back and neck begin to fatigue without a surface to rest against. The mesh material across the back maintains its shape under this contact rather than compressing flat, so the support remains consistent over time.

The seat cushion uses fabric rather than mesh, providing a firmer, more cushioned base. The 50cm seat width and 44cm depth give enough room to sit without feeling cramped, while keeping the seat compact enough that the chair slides easily under a desk when not in use.

Here is why the Ergonomic Office Chair is the best choice for our customers.

This chair was designed for people who spend long hours seated at a desk, whether for remote work, study, or office-based tasks. The height range, reclining back, and ventilated mesh construction address the practical discomforts that build up across a full working day.

The 110kg weight capacity and reinforced base make it suitable for a wide range of users, and the two-year warranty covers the mechanism and materials over an extended period of regular use.

Here are 6 reasons we believe the Ergonomic Office Chair is the right fit for your household.

Full-Length Back Support from Lumbar to Shoulders

The high back covers the entire posterior spine rather than just the lower lumbar region. This reduces upper back and neck strain during long sessions at a screen.

Mesh Ventilation Prevents Heat Build-Up

The perforated backrest keeps air moving behind the torso. In warmer office conditions, this makes a measurable difference in comfort compared with solid padded chair backs.

Height Adjusts to Fit Most Desk Configurations

The 62cm to 72cm seat height range works with standard fixed desks and with sit-stand desks in their seated position. Adjustment requires no tools and takes seconds.

Recline Supports Posture Variety Through the Day

Locking the seat in an upright position for focused work and releasing it for reading or calls allows you to shift posture without getting up, which reduces sustained pressure on the lower back.

Supports Users Up to 110kg

The reinforced five-point nylon base and pneumatic cylinder are rated to 110kg, covering the majority of adult users without compromising the stability or longevity of the mechanism.

Neutral Grey Colourway for Any Office Setting

The grey upholstery and black base work across home offices, business settings, and study areas without clashing with existing furniture or flooring.

Frequently Asked Questions

How long does assembly take?

Most users complete assembly in 20 to 30 minutes using a standard screwdriver or the included hex tool. Hardware and visual instructions are included in the box.

At 62cm minimum seat height, the chair fits comfortably under any desk with a clearance of 70cm or more, which covers most standard fixed-height desks.

The armrests are fixed in position. They are set at 44cm above the seat, which is within the standard ergonomic range for keyboard and mouse use.

The mesh is constructed from reinforced nylon, which holds its structure under regular pressure without stretching or splitting. It does not compress flat the way foam backs do with extended use.

The five casters are designed for smooth movement on tile, wood, and laminate as well as carpet. They do not require a chair mat on hard floors, though one can be used if preferred.

The warranty covers manufacturing defects in materials and components, including the pneumatic cylinder, base, and frame, for two years from the date of purchase.

]]> Deep Relief Pro Massage Gun https://nissi.mt/product/deep-relief-pro-massage-gun/ Sun, 28 Jun 2026 06:11:47 +0000 https://nissi.mt/?post_type=product&p=5546

A percussion massage gun with 9 heads and 9 intensity levels in a 0.57kg triangle frame.

The Deep Relief Pro delivers percussion therapy at up to 3,200 strikes per minute, with 9 speed settings that step from low-intensity relaxation through to deep tissue work. Nine interchangeable heads cover different muscle groups and tissue types, from large flat surfaces to small trigger point locations. The motor runs below 45dB throughout all settings.

The body is shaped as a compact triangle, which distributes grip across three contact points and keeps the wrist in a more neutral position during use on hard-to-reach areas like the upper back and shoulders. At 0.57kg and 20 x 21.5 x 14.5cm, it fits into a gym bag alongside training equipment without taking up meaningful space.

9 Intensity Levels

Speed steps from a gentle level 1 through to a firm level 9, giving precise control over how much force the head delivers into the tissue. Lower settings suit warm-up or sensitive areas; higher settings are used on dense muscle groups like the glutes, quads, and calves.

9 Interchangeable Massage Heads

The included heads cover distinct applications: a round head for large muscle groups, a bullet head for trigger points, a flat head for general use, and a fork head suited to the spine and neck, among others. Each head attaches and detaches by hand in a few seconds.

Sub-45dB Motor

Operating below 45dB, the gun is quieter than a normal conversation. This makes it practical for use in shared spaces, hotel rooms, or offices without drawing attention during a recovery session.

USB Type-C Charging

The gun charges via a standard Type-C cable at 5V/1A. Battery life provides several hours of use between charges, and the Type-C connection means the same cable used for phones and other devices works here too.

Nine heads for nine different tissue types and locations.

Most muscle groups require a different approach depending on their size, depth, and sensitivity. A large, flat head spreads force across the quad or hamstring without concentrating pressure on any single point. A bullet head pins directly into a specific knot or trigger point for localised release. The fork head straddles the spine, applying pressure on either side without direct contact with the vertebrae.

Having all nine heads in the same set means the gun works across the full body from a single purchase. Switching heads between a shoulder warm-up and a calf recovery, for example, takes seconds and does not require carrying separate tools for each area.

Here is why the Deep Relief Pro Massage Gun is the best choice for our customers.

This gun was built for people who want post-training muscle recovery and day-to-day tension relief at home, without booking appointments or relying on foam rollers alone. The combination of nine heads and nine speed settings covers the full range of percussion therapy needs from one compact device.

The sub-45dB motor and lightweight body make it as practical for desk workers managing neck and shoulder stiffness as for athletes recovering from training.

Here are 6 reasons we believe the Deep Relief Pro Massage Gun is the right fit for your household.

Nine Heads Cover Every Major Muscle Group

The included set addresses large muscle surfaces, deep trigger points, the spine, neck, and joints from a single kit. There is no need to purchase additional attachments separately.

Up to 3,200 Percussions Per Minute

The motor delivers rapid, consistent strikes at the top speed setting, producing the tissue penetration needed for genuine deep muscle work rather than surface vibration only.

Below 45dB at All Speed Levels

The gun operates quietly enough for use during a television programme, in a shared bedroom, or in an office. There is no motor whine or rattling noise at any of the nine settings.

Triangle Design for Better Grip Control

The three-sided frame gives the hand a stable hold during self-massage on awkward angles, reducing the wrist strain that straight-handled guns can cause when reaching the upper back or shoulders.

0.57kg Weight for Extended Use

At just over half a kilogram, the gun does not fatigue the arm during a 10 to 15 minute recovery session. This is relevant for people treating multiple muscle groups in sequence.

Type-C Charging with Multi-Hour Battery Life

The standard Type-C connection removes the need for a proprietary charging cable, and the battery lasts through multiple sessions between charges, making it practical for daily use.

Frequently Asked Questions

Which head should I use for general post-workout recovery?

The round head is the standard starting point for large muscle groups such as the quads, hamstrings, glutes, and upper back. The flat head works across most body parts for general maintenance. The user manual specifies the intended use of each of the nine heads in more detail.

A typical recommendation is 1 to 2 minutes per muscle group. For trigger point work with the bullet head, shorter bursts of 30 to 60 seconds on the specific spot are more appropriate than extended continuous pressure.

The fork head is designed for use alongside the spine rather than on the vertebrae directly. Avoid applying the gun directly to bone, joints, or areas of acute injury. If you are managing a specific condition, consult a physiotherapist or healthcare professional before use.

The motor operates below 45dB, which sits below the level of a quiet conversation (approximately 60dB). Most comparable guns in this price range operate between 50 and 65dB, making this one of the quieter options at this category.

A carry case is not included. The compact triangle form means the gun and heads fit into a medium-sized gym bag or toiletry bag without dedicated storage. A separate case can be purchased if preferred.

Yes. Lower intensity settings (levels 1 to 3) with the round or flat head are suitable for pre-training warm-up on large muscle groups. Higher settings are more typically used post-training for deeper recovery work.

]]> Studio-Style Indoor Cycling Bike https://nissi.mt/product/studio-style-indoor-cycling-bike/ Sun, 28 Jun 2026 06:11:11 +0000 https://nissi.mt/?post_type=product&p=5306

An indoor cycling bike with a silent belt drive, fully enclosed flywheel, and 130kg-rated reinforced steel frame.

The Studio-Style Indoor Cycling Bike is a friction-resistance training cycle built for daily home use. The belt drive produces significantly less mechanical noise than chain-driven alternatives and requires less maintenance over time. Resistance is controlled through a central 360-degree knob that presses a friction pad against the flywheel, giving continuous, stepless control over pedalling effort at any cadence.

The five-function LCD console reports heart rate, speed, distance, calories, and elapsed time throughout each ride. Heart rate is read through pulse sensors in the handlebar grips, removing the need for a separate chest strap or wristband. A phone cradle sits at eye level at the front of the handlebars. The reinforced steel frame holds a 130kg maximum user weight, and the seat and handlebars each adjust across multiple positions to suit different rider heights.

Silent Belt Drive System

A reinforced belt replaces the chain, removing the metal-on-metal contact noise that occurs during faster pedalling. This makes the bike viable for apartments and shared households where others are present during a session. Belt drives also wear more slowly than chains, reducing long-term maintenance requirements.

360-Degree Stepless Tension Knob

The resistance knob rotates a full 360 degrees with no click-stop positions, so the rider can land on any friction level across the full range rather than fixed increments. Adjustments mid-ride take under a second without breaking pedalling rhythm. Pressing the knob down applies a braking action that brings the flywheel to a controlled stop.

Fully Enclosed Flywheel Housing

A wraparound plastic cover encloses both faces of the flywheel, preventing contact with hands, clothing, or objects near the bike during and after use. This is a practical safety consideration in homes with children or pets, and the sealed cover also keeps dust off internal components between sessions.

Handlebar Pulse Sensors and Phone Cradle

Metal contact sensors in both handlebar grips feed a continuous heart rate reading to the LCD console without the rider removing their hands from the bars. The phone cradle mounts at approximately eye level and holds a standard smartphone for music, virtual classes, or training apps throughout the ride.

An indoor cycling bike that actually fits your life.

The bike’s footprint is 85cm long by 45cm wide, standing 110cm tall at the handlebars. That is roughly the floor area of a single dining chair. At 18kg with front transport wheels, it can be tilted and rolled to a storage position between sessions without lifting.

The 130kg weight capacity and multi-position adjustments mean the bike can be shared by household members of different heights and builds. The stepless resistance knob covers the full effort range for any rider, regardless of fitness level or body weight.

Here is why the Studio-Style Indoor Cycling Bike is the best choice for our customers.

This bike was designed for people who want consistent indoor cardio without noise, safety concerns, or space demands getting in the way. The belt drive removes the noise problem at its source. The enclosed flywheel removes the contact risk for households with children or pets. Both are real-world design decisions rather than spec-sheet additions.

The 360-degree tension knob, handlebar pulse sensors, and phone cradle make it usable across a range of session types, from steady recovery rides to structured interval work.

Here are 6 reasons we believe the Studio-Style Indoor Cycling Bike is the right fit for your household.

A Drive System That Does Not Disturb Others

The belt transmission produces low mechanical noise at all cadences, making it suitable for early morning or late evening use in apartments and homes with other occupants present.

Resistance With No Fixed Stops

The stepless 360-degree knob allows any friction level across the full range. Transitions between intensities during interval training are smooth and immediate, with no preset click positions to land on.

Flywheel Coverage That Keeps the Machine Safe

The full wraparound housing blocks access to the spinning flywheel during and after a ride. For households where children or animals move around the training area, this removes a meaningful contact hazard without requiring the bike to be stored away each time.

Heart Rate Data Without a Separate Monitor

Pulse sensors in both handlebar grips feed live heart rate to the LCD console throughout the ride. Training within a target zone requires no additional wearable device.

Adjustable Fit for More Than One Rider

Both seat height and handlebar height lock into multiple positions. Two riders of noticeably different heights can each dial in a comfortable fit from the same machine, making it a household asset rather than a single-user purchase.

Transport Wheels for Easy Repositioning

Front-mounted wheels allow the bike to be tilted at the rear and rolled across hard floors without lifting. A bike that moves easily is one that actually gets used and put away, rather than occupying permanent floor space.

Frequently Asked Questions

How quiet is this bike during a session?

The belt drive removes the chain-contact noise common on lower-grade bikes. During a ride, the main sound is the rider’s breathing and light friction from the resistance pad. This is generally compatible with use in apartments and shared homes, including rooms near sleeping areas.

A friction pad presses against the flywheel surface when the tension knob is turned clockwise, increasing pedalling effort. Turning anticlockwise reduces contact and lightens resistance. The knob has no fixed stops, giving continuous adjustment across the full range. Pressing the knob down applies a braking action that stops the flywheel quickly.

Both the seat and handlebars offer multi-position height adjustment, each locking securely before use. The available range covers most adult rider heights, making the bike practical for household sharing without tool-based adjustments between sessions.

The console shows heart rate (via the handlebar grip sensors), speed, distance, calories burned, and elapsed time, all visible simultaneously on a single screen. The console is pedal-powered and activates automatically when riding begins.

The housing covers the external faces of the flywheel only and plays no part in the resistance mechanism. Riding feel and resistance response are unchanged. The cover functions purely as a physical guard.

The major structural components arrive pre-built. Handlebars, seat post, and pedals typically need to be attached. A full instruction manual is included, and basic hand tools are sufficient. Most users complete setup in under an hour.

]]> Foldable 8-Level Magnetic Rowing Machine with Tablet Holder https://nissi.mt/product/foldable-8-level-magnetic-rowing-machine-with-tablet-holder/ Sun, 28 Jun 2026 06:10:24 +0000 https://nissi.mt/?post_type=product&p=5344

A rowing machine that trains over 80% of your muscle groups and folds away in seconds.

The Foldable 8-Level Magnetic Rowing Machine delivers full-body cardio in a frame that collapses upright for storage in apartments and houses with limited floor space. Eight discrete resistance levels, a 3kg magnetic flywheel, and a reinforced aluminium rail combine to produce a machine suitable for users across a wide range of fitness levels, from first sessions through to regular strength-focused training.

Each rowing stroke activates the legs through the drive phase, transfers force through the core, and finishes with the upper back, shoulders, and arms on the pull. The 8-level resistance dial covers recovery-pace rows at settings 1 to 3, sustained endurance work at settings 4 to 6, and heavier load conditioning at settings 7 and 8. The widened alloy rail keeps the seat glide smooth and vibration-free at all resistance levels, and the machine supports users up to 150kg across a full 1440mm rowing stroke.

3kg Magnetic Flywheel

The sealed 3kg flywheel generates resistance through magnetic force rather than physical friction, producing a smooth, consistent pull at every setting. Operating noise sits at approximately 45dB, quiet enough for use while others sleep or watch television in the same room.

Eight Graduated Resistance Positions

A single rotary knob steps through eight clearly labelled resistance settings. The range spans from light recovery effort through to resistance that taxes the posterior chain and upper body on every stroke, with no tools required to change between levels mid-session.

Widened Aluminium Alloy Rail

The reinforced 1440mm aluminium track is precision-levelled to carry the seat carriage without lateral play or vibration. The widened profile adds lateral stability compared with narrower single-rail designs, which is particularly relevant for users at higher body weights approaching the 150kg capacity.

90-Degree Vertical Fold with Transport Wheels

The frame hinges to a vertical upright position, reducing the machine's floor footprint to under 0.6 square metres for storage. Transport wheels built into the flywheel housing allow the folded machine to be rolled across hard floors without lifting.

Low-noise operation that fits around household life.

At 45dB, the magnetic flywheel runs quieter than a normal conversation (60dB) and comparable to a quiet library setting. This matters in shared apartments and terraced houses where treadmills and fan-based resistance machines are too loud for early morning or late evening use. The non-contact magnetic resistance system produces no mechanical scraping, belt slap, or fan noise, so the only sound during a session is the seat carriage moving along the rail.

The memory PU seat is oversized and contoured to support the tailbone through extended sessions. Unlike standard foam, memory PU material returns to its original shape after use and does not compress flat over time. The rotating footplates pivot with the ankle’s natural angle during the drive phase, reducing the torque placed on the knee joint, which makes the machine practical for users managing lower-limb discomfort or returning from injury.

Here is why the Foldable 8-Level Magnetic Rowing Machine is the best choice for our customers.

This machine was designed for households that want a full-body cardio option without dedicating a permanent large footprint to gym equipment. The combination of foldable storage, quiet magnetic resistance, and a 150kg weight capacity makes it practical for a wide range of home setups, from studio apartments to family living rooms.

The eight-level resistance range means the machine does not become redundant as fitness improves. A person starting at level 1 can progress systematically to level 8 over months without needing to replace or upgrade the equipment.

Here are 6 reasons we believe the Foldable 8-Level Magnetic Rowing Machine is the right fit for your household.

Trains the Whole Body in One Motion

Each rowing stroke engages over 80% of the body's muscle groups, including the legs, glutes, core, back, shoulders, and arms, making it one of the most complete single-machine cardio options available for home use.

Quiet Enough for Shared Living

At roughly 45dB, the magnetic flywheel produces less noise than a standard conversation. Sessions at any hour are unlikely to disturb family members or neighbours in adjoining rooms.

Folds to Under 0.6 Square Metres

The 90-degree vertical fold reduces the machine to a compact standing profile. Transport wheels make repositioning straightforward, so the machine can be stored in a hallway, bedroom corner, or storage room between sessions.

Supports Users Up to 150kg

The reinforced aluminium alloy rail and frame are rated to 150kg, covering the majority of adult users and allowing multiple household members of different weights to share the machine safely.

Eight Resistance Levels for Long-Term Progression

The dial moves through eight settings without tools or reconfiguration, from low-intensity recovery rows through to high-resistance strength conditioning. A single purchase covers years of training progression.

Joint-Friendly Design

Rotating footplates, a cushioned memory PU seat, and a smooth magnetic drive combine to produce a low-impact session that places minimal stress on the knees, hips, and ankles compared with running or jumping-based cardio.

Frequently Asked Questions

How loud is the machine during a typical session?

The magnetic flywheel operates at approximately 45dB, which is quieter than a normal speaking voice. The primary noise you will hear is the seat carriage moving along the aluminium rail, which is a low mechanical sound rather than a motor or fan noise.

Fully assembled for use, the machine measures 1440mm long by 470mm wide by 610mm high. When folded to its upright storage position, it occupies less than 0.6 square metres of floor space.

Yes. The 150kg weight capacity and eight-level resistance dial make the machine suitable for multiple users with different weights and fitness levels. Each person can select their own resistance setting independently using the rotary knob.

The rotating footplates adjust to the user’s natural ankle angle during each stroke, which reduces rotational stress on the knee compared with fixed-pedal designs. The seated rowing motion is low impact, but users with specific medical concerns should consult a healthcare professional before starting any new exercise programme.

The integrated stand is designed to hold tablets and larger smartphones at eye level during use. It is positioned above the resistance mechanism so the screen remains visible throughout the full rowing stroke.

The flywheel housing arrives pre-assembled. Users need to attach the rail, seat carriage, footplates, and tablet holder. Assembly typically takes 30 to 45 minutes using the tools supplied with the machine.

]]>